V-mixer is an efficient asymmetric mixing equipment. With its unique V-structure, two V-shaped cylindrical cylinders with different heights are rotated by mechanical transmission, so as to drive the materials in the cylinders to mix. In the process of rotation, the material is subjected to gravity and centrifugal force in the cylinder, which produces reciprocating turning and diffusion and realizes uniform mixing.

Features and advantages

Reasonable structure: V-type mixer has simple structure, convenient operation, easy maintenance and cleaning.

Uniform mixing: due to the multi-dimensional turning and rolling of materials in the V-shaped cylinder, the mixing uniformity is as high as over 99%.

Wide application range: suitable for mixing powder or granular materials in chemical industry, food, medicine, feed, ceramics, metallurgy and other industries.

Good sealing: vacuum suction can be used to work in a sealed state, and there is no transmission mechanism inside, which is clean, hygienic and has no dead angle, in line with GMP requirements.

Simple operation: the whole machine is easy to operate and control, and can realize automatic production.

application area

Chemical industry: used for mixing pigments, additives, battery materials and other fine chemicals.

Pharmaceutical industry: suitable for the uniform mixing process of granular drugs and powder drugs to ensure the quality and stability of drugs.

Food processing industry: used for mixing food additives and ingredients to improve production efficiency and ensure stable and reliable product quality.

Agriculture and fertilizer manufacturing: It is used for the preparation and production of fertilizers and other agricultural substances, such as pesticides, to improve product quality and work efficiency.

R&D and production of new materials: used in the R&D and experimental production of new materials to ensure the stability and consistency of raw materials.

Environmental protection engineering: in environmental engineering such as wastewater and sludge treatment, V-type mixer is used to improve the efficiency and quality of the project and reduce environmental pollution.

Use and maintenance

Preparation before use: place the machine stably, install the foot of the machine and pad it flat; Add lubricating oil; Carry out no-load operation, and check whether the fasteners are loose and the electricity is normal.

Feeding and mixing: turn the feeding port to the top, open the feeding cover to feed, and the feeding amount shall not exceed the specified volume; Close the feeding cover and start the machine for operation; The mixing time is adjusted according to the process requirements.

Stop and discharge: after mixing, stop by adjusting the motor speed button; After stopping the machine, the discharge port is facing the ground, and the discharge port is opened for discharging.

Maintenance: regularly clean the internal and external walls and stirring blades of the mixer; Check whether the fasteners are loose; Check whether the electrical system is normal; Change the lubricating oil regularly.

matters need attention

Safe operation: When operating V-mixer, the safety operation rules should be strictly observed to ensure the safety of personnel and equipment.

Avoid cross-contamination: When replacing mixed materials, the inner and outer walls of the mixer and the stirring blades must be thoroughly cleaned to avoid cross-contamination.

Maintenance: regularly maintain the V-mixer to ensure the normal operation of the equipment and prolong its service life.

V-mixer has been widely used in many industries because of its unique structure and excellent performance. In the process of use, the operating procedures and safety requirements should be strictly observed to ensure the normal operation of the equipment and the safety of personnel.